Hey do you want to dress up your car or trucks piping braided hose AN or PTFE they have everything you need check them out! Not only fuel but for all liquids oils brake power steering this is the shop that has what you need.
I've been using this brand for 3 years. I've used all different brands from high dollar to cheap stuff.
Hot rod fuel hose always has the best quality for the best price.
I do ls swaps for a living and over hot rod fuel hose kits are in about 25 cars I've built. I trust the quality in very expensive cars and never have a doubt in my mind. When I need hoses and fittings. These guys always make sure I'm set up for success. If you are looking for quality materials and great customer service these are the people you want. I take pride in using their products in my everyday work. Thanks Again
They work as advertised. They make the cleanest cut possible for a generic cutter like this. However, I think the shears could be improved with a tighter cutting radius. If the cutting hook was smaller, I think it wouldn't crimp as much as it does. I used a 5.56 blue dummy round to round the crimped cut afterwards, and that practically addressed my issues with it. This was for 6AN line.
The 3 piece that seals around the PTFE lines is clean. That makes this an order of magnitude easier to assemble than versions made for rubber hoses. Count your connections before buying! I had to order again because I forgot two or three connections.
I originally did my race setup without PTFE lines, and those rubber/stainless braided hoses stunk up the garage like nothing I've ever used. After replacing everything with the PTFE lines, the garage smells nice. Worth every dollar, and the headache-free smell of the garage makes it worth it too.
Great product, fast shipping, great customer service. We will be ordering a few more things soon.
Fittings worked mint. Get you a stock ‘87 TBI tank, whack off the barbs with a cutoff wheel, olives slide right on. Good seal, easy assembly, great looks.
I looked for information everywhere for the fitting size that fit the radiator transmission cooler lines for my 90 Chevy 1500 pickup. I finally got the correct information from Justin! Thanks buddy! The ½-20 inverted flare fit the radiator and I was able to make the transmission cooler lines that went from the radiator to the 700R4.
I was glad I bought the vice jaws, without them assembly of the AN fittings on my hose would have been much more challenging. They did not marr the finish on the fittings and worked great.... almost. The magnets that hold them to the vice need to be stronger, I must have picked them up off the floor at least 20 times. I wouldn't try assembling hoses without them though!
I read this company has good quality hoses. Once I received them, I was impressed with the fit and finish of these. These seem 1000x better than traditional ss braided hoses. I also have earls on my car and these are just as good. Will buy again for sure.
I just plumbed another fuel system using your AN6 fittings and hose along with the Oil system using your AN8 fittings and hose. I have been using Hot Rod Fuel Hose for the last 4 years. I have 8 Class 11, V W bugs racing Off Road using your products.
With zero issues.
Very happy with all your products.
11 Brothers Motorsports.
For some reason these 3/8 do not fully seat on the fuel filter provided in the ls returnless kit, or on the fuel rail. It looks like it isn’t bored deep enough. 2 fitting from original kit , and 2 replacement fittings that were sent to replace them.
That is by design there is a small cut out in the nut that goes on that fitting. If you place the raised lip into the cutout and then thread the fitting together you will be good to go. I will send you a photo by email to show you what I mean.
Great product and looks great with the build. Great value for the bundle. The color and angle options where great.
I am installing a Holley Sniper on my Bronco and need to have a return line. This is a GREAT product to help save time and money with performance in mind. Plus, they are easy to get if you need another one.
First time building lines for my Bronco. This was a life and time saver. The cuts were perfect and easy to do. Great investment.
Really appreciate the quality of the fittings. Dressed up my engine compartment nicely