Didn’t get to select L or R side when ordering.
Didn’t get to select L or R side when ordering.
The hose and fittings are nice quality. Their ability to get stuff shipped out quickly dose not happen.
It took a week to get my order to shipping.
Skip to product information
AN PTFE Reusable straight swivel hose end AN6, AN8, AN10
$16.00
Presale: Ships When In Stock
These bundles and LS swap kits in BLACK hose and BLACK fittings are available for presale and will ship as soon as they are back in stock.
- Estimated arrival: Calculating….
- Limited quantities on the first shipment — reserve yours now.
- We’ll ship immediately once inventory lands.
Reliable shipping
Flexible returns
Straight AN PTFE Hose End Fittings – Available in AN6, AN8 & AN10
Reliable, chemical-resistant, and built for precision – our Straight AN PTFE Hose End Fittings are engineered to seamlessly connect with **Hot Rod AN PTFE™ stainless or nylon braided hose**, offering leak-free performance for EFI fuel systems, LS swaps, and high-pressure plumbing projects.
🏆 Why Choose These Hose Ends?
- ✅ Engineered for PTFE-lined hose: compatible with full braided constructions
- ✅ Available in AN6, AN8, AN10 sizes with multiple anodized color finishes
- ✅ Straight swivel design provides easy alignment and clean routing
- ✅ Reusable fittings—just replace the ferrule upon reassembly
- ✅ Features Hot Rod AN branding with lifetime warranty on fittings
⚠️ Pro Installation Tips (from Our Guide)
Follow the official instructions for optimal performance: (Installation Instructions)
- 📝 **Tape & mark the hose** before cutting to prevent braid fray and ensure a straight, clean cut.
- ✂️ Use **hose cutting shears** whenever possible — it gives the cleanest cut with minimal liner distortion.
- 🔧 Install procedure: slide nut on, gently spread braid, insert ferrule over PTFE liner, press nipple fully, hand-start the nut, then torque to ~1 mm gap using a vice and soft jaws or aluminum spanner wrench.
- ⚠️ Never reuse ferrules: each installation requires a new ferrule to maintain seal integrity.
- ✅ Pressure test each line after assembly to check for leaks before running the system.
🔧 Build-Out Essentials: Complete Your Fuel System
🔩 PTFE Hose & Fitting Bundles
Skip guesswork – get matched hose and fittings ready to install:
- PTFE AN Hose & Fitting Kits – available in AN6, AN8, AN10, color-coded for style
🚗 LS Swap Fuel System Kits
All-in-one kits for return or return-less LS EFI conversions, including hose, fittings, and essential adapters:
🔄 More Hose Fittings (Angled, Special, Etc.)
- Hose Ends Collection – straight, 45°, 90°, 180° in AN6–AN10
💧 Fuel Pumps Compatible with AN Lines
- Spectra 190 LPH – good for stock LS setups (~450 HP)
- Walbro 255 LPH – fits medium builds (~600 HP)
- Aeromotive 340 LPH – supports up to ~850 HP
🧼 Fuel Filters for Injector & Pump Protection
- Inline Fuel Filters Collection – AN6-fitting compatible filters designed for EFI systems
🛠 Installation Tools – Make It Easy
Achieve professional results with the right tools:
- AN Hose Installation Tools – including aluminum spanner wrench, hose shears, and cutters
📐 Fitment & Compatibility Summary
- • Straight AN hose ends compatible only with Hot Rod AN PTFE braided hose (stainless or nylon braid).
- • Available in AN6, AN8, AN10 sizes to match fuel, oil, or cooler system requirements.
- • Suitable for EFI fuel lines, LS engine swaps, oil cooler, power steering, and transmission lines.
- • Follow installation guide to ensure clean cuts, proper seal, and long-lasting performance.
🏁 Final Word
Tight tolerances, premium materials, and thoughtful design make our straight AN PTFE hose ends the ideal choice for high-pressure builds. Backed by installation guidance, tool recommendations, and seamless compatibility with other HotRodAN products — you’re not just buying a fitting, you're building confidence from start to finish.