| /

PTFE lined and stainless braided hose

Hot Rod fuel hose AN PTFE lined hose is lighter weight and has superior chemical resistance compared to standard rubber lined AN hoses. Vapor escaping from the hose is eliminated and prevents fuel odors in the garage that could occur with a rubber lined AN hose

Stainless hose in AN6 size will ship approximately Jan 30th

This hose is commonly used for fuel lines. 

Other examples of use for this hose would be transmission cooler lines, vacuum lines,  and many other applications with compatible fluids.

 

Our hose is compatible with the following fluids.

    1. Automatic transmission fluid
    2. Bio-Fuel
    3. Brake fluid
    4. Diesel
    5. E85
    6. Engine coolant
    7. Engine oil
    8. Ethanol
    9. Gasoline
    10. Methanol
    11. Power steering
    12. Vacuum

    You must use PTFE hose ends, be sure to use only Hot Rod fuel hose fittings to ensure a leak free seal.

    Hose Size  Diameter (inside) / (outside) inches Working Pressure Burst Pressure Min Bend Radius
    AN6  0.320 / 0.435 2500 PSI 10000 PSI 2.5"
    AN8 0.420 / 0.510 2000 PSI 8000 PSI 3.5"
    AN10 0.500 / 0.610 1500 PSI 5000 PSI 4.5"

     

     Operating Temperature

    -60.0 degrees F to 400.0 degrees F

    Customer Reviews

    Based on 97 reviews
    94%
    (91)
    3%
    (3)
    0%
    (0)
    1%
    (1)
    2%
    (2)
    N
    Nathan Sumrall
    WORKS AS ADVERTIZED

    I originally did my race setup without PTFE lines, and those rubber/stainless braided hoses stunk up the garage like nothing I've ever used. After replacing everything with the PTFE lines, the garage smells nice. Worth every dollar, and the headache-free smell of the garage makes it worth it too.

    K
    Kurt Ali
    PTFE hoses

    I read this company has good quality hoses. Once I received them, I was impressed with the fit and finish of these. These seem 1000x better than traditional ss braided hoses. I also have earls on my car and these are just as good. Will buy again for sure.

    K
    Kevin Burns
    Hotrod Fuel Lines and Fittings

    I received my order quickly and was able to build my new fuel lines in about an hour. The quality of the hose and fittings is really good and everything went together very smooth. I would recommend ordering some additional ferrules to have on hand in the event you make a mistake. I thought I might have to adjust the length og one of my lines so I placed a second order for the ferrules.

    J
    Jorge Castillo
    Quality

    Customer service is top notch with hot rod fuel hose. The hose and hose ends are great quality. Their ls swap fuel kit makes it so easy

    J
    John B
    Fuel lines

    Awesome lines an fittings wouldn't hesitate to order again